Components
  • Clinker: > 95%
  • Minor additional component: < 5%
  • Setting regulator: calcium sulfate
    • Chemical Requirements
  • Loss on Ignition: < 5%
  • Insoluble Residue: < 5%
  • SO3: < 4%
  • Cl-: < 0.10%
    • Physical Requirements
  • Initial Setting Time (minutes): > 60
  • Expansion (mm): < 10
    • Mechanical Requirements
  • Compressive Strength
  • Development
  • Minimum values:
  • 2 days: 20.0 MPa
  • 28 days: 42.5 MPa
    • Advantages
  • Early strength development
  • High strength at all ages
  • Short formwork removal time
  • Compatible with the use of mineral additives

    • Applications

    Ready-Mix Concrete Production: Suitable for the production of all strength classes, providing high performance in both early and final strength.
    Precast Production: Suitable for the production of precast and prestressed concrete.
    Road Pavements: Can be used in concrete surface layers for roads with heavy traffic.
    Construction Chemicals: Suitable for the production of grout, tile adhesive, and various construction chemicals.
    General Use: Suitable for general use such as grout mortar, plaster, and repair works.

    • Usage Precautions
    • Adhere to the minimum cement dosage and maximum water/cement ratio specified in standards.
    • Apply appropriate protection and curing processes as per standards.
    • Do not remove formwork until the concrete has reached sufficient mechanical strength.
    • Avoid long-term transportation of ready-mix concrete.
    • Take precautions to prevent cracking when pouring concrete in hot and windy conditions.
    • Non-Recommended Uses
    • It is not recommended for environments exposed to sulfates and harmful chemicals without the use of mineral additives (such as ground granulated blast furnace slag or fly ash).
    • It is not recommended for mass concrete and situations requiring low hydration heat without the use of mineral additives.
    • Environment, Safety, and Storage
  • Use appropriate protective clothing, gloves, and eye and face protection.
  • Request the product’s Safety Data Sheet for detailed safety information.
  • Store bulk cement in suitable silos protected from moisture and wind; bagged cement should be stored in protected warehouses, away from moisture, wind, and cold, stacking no more than 10 bags high.

    • At Bey Çimento

    We are committed to offering innovative, eco-friendly, and high-quality solutions in the construction industry, working to build the structures of the future.
    Contact Us